DC Motor PMG 132

The PMG 132 is a multi-pole, permanently excited DC motor with brushes. Its compact design requires for less installation space while providing strong torque of up to 38 Nm.

Gerelateerde projecten


The Perm PMG 132 pancake motor is a lightweight motor designed for high performance racing applications. Similar in size and weight to a Briggs & Stratton ETEK, but at the same Voltage, it has a 50% higher peak power output, a 40% higher torque constant and 120% more stall torque.

The PMG 132 is a “pancake” style neutrally-timed, brushed, permanent magnet DC motor manufactured by Perm Motor in Germany. It is similar in design to the Lynch/LEMCO LEM-200 and Briggs & Stratton ETEK motors but more powerful. The armature is made of flat copper strips stacked together so there’s no stack of steel laminates like in a traditional motor which gives the motor low cogging. Its high power, high efficiency and comparably small size make it a good choice for small electric vehicles, Electrathon vehicles, generators, go-karts and robots.


The motor’s body is 222 mm (8.75″) in diameter and 120 mm (4.72″) long. The shaft is 19 mm (0.748″) in diameter and 35 mm (0.83″) long with 6mm key and threaded hole.


Voltage: 24-72V
Weight: 24.8 lb
Angular-velocity constant: 50.2 rpm/V
Torque constant: 27 ozf·in/A
Terminal resistance: 0.025 Ohm
No-load current: 6A
Rotor Inertia: 1370 oz·in_
Inductance: 19 µH
Continuous current: 110A
10 minute current: 200A
Terminals: 8mm

48V Performance Peak efficiency: 86%
Peak power: 19.1 hp
No-load angular velocity: 2380 r/min
Stall current: 960 A
Stall torque: 25600 ozf·in

72 V Performance Peak efficiency: 88.6%
Peak power: 34.3 hp
No-load angular velocity: 3590 r/min
Stall current: 1440 A
Stall torque: 38500 ozf·I

Voltage 24 36 48 60 72
Current 110 A 110 A 110 A 110 A 110 A
Power 2.2KW 3.5KW 4.7KW 5.97KW 7.22KW
Speed 1080 1700 2300 2870 3480
Torque 20.5Nm 20.5Nm 20.5Nm 20.5Nm 20.5Nm